BMR Suspension Control Arms (AA040H)

Fits 1994-2004 Ford Mustang ;Eliminates lower A-arm deflection;Non-adjustable design;Retains factory-style spring cup;does not require coil-overs;Improves steering feel and response for normal and performance driving;1.50-inch and 1.25-inch DOM steel construction;Fixture welded for precise fit;Greasable, 95-durometer polyurethane bushings;Pre-assembled with new heavy-duty ball joints and polyurethane bumpstops;Durable powdercoat finish;Proudly made in the U.S.A.. BMR AA040 lower A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations..
A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA040 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA040 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.