BMR Suspension Control Arms (AA756H)

Fits 2010-2014 S197 Mustangs;19mm tall ball joints;Eliminates lower A-arm deflection;Delrin/polyurethane bushings;Improves steering feel and response for normal and performance driving;Fixture welded for precise fit;Greasable, 95-durometer polyurethane bushings (front mount);Greasable Delrin bushings (rear mount);Pre-assembled with new heavy-duty ball joints;Durable powdercoat finish;Proudly made in the U.S.A.. BMR AA756 lower A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations..
A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMRs AA755 Lower A-arms are equipped with greasable heavy-duty ball joints, 95-durometer polyurethane bushings (front mount), and greasable Delrin bushings (rear mount) to handle the high loads. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. The combination of poly and Delrin bushings gives you improved steering feel and responsiveness for any for of driving. Based on our well proven traditional A-arm design, these Handling A-arms feature taller ball joints to raise the roll center height on lowered vehicles for improved handling.

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMRs AA755 Lower A-arms are equipped with greasable heavy-duty ball joints, 95-durometer polyurethane bushings (front mount), and greasable Delrin bushings (rear mount) to handle the high loads. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. The combination of poly and Delrin bushings gives you improved steering feel and responsiveness for any for of driving. Based on our well proven traditional A-arm design, these Handling A-arms feature taller ball joints to raise the roll center height on lowered vehicles for improved handling.