Motul Gear 300 - 1 Liter (105777)

TYPE OF USE: Specially designed for racing vehicle gearboxes: speed way, rally, raid; All mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.; PERFORMANCES:; STANDARDS: API GL4 and GL5 / MIL-L-2105D; Extreme pressure lubricant for an efficient anti-wear protection, a better resistance at high temperature and a longer life time.; 0percent shear loss : Unshearable oil film in extreme conditions.; Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 standard, July 1998 update.; Very high lubricating power which decreases friction and wear.; 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise.; Fluid at low temperature to allow easier gear shifting when the gearbox is cold.; Less effort required on the gear lever to shift the gears.; Suitable for any type of seal and yellow material used in gearboxes design.; Anti-corrosion, Anti-foam properties; RECOMMENDATIONS: Oil change: According to manufacturers' requirements and adjust according to your own use.. Fully Synthetic - Ester based; Racing gearbox and differencial lubricant; Standards: API GL-5 and GL-4 / MIL-L-2105D.
Fully Synthetic lubricant for all mechanical transmission of high performances and racing cars. For synchronised or not synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system.

100% Synthetic lubricant for mechanical transmission. This product was specially designed for high performances and racing cars fitted with mechanical transmission, synchronized or not, differential, transfer gearboxes and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed requiring API GL-5 standards. This product is an synthetic extreme pressure lubricant for an efficient anti-wear protection, a better resistance at high temperature and a longer life time. Its very high lubricating power decreases friction and wear and lower the effort made on the lever to switch gears even when it is cold. Contains a special friction modifier to avoid noisy or dragging limited slip differential. Offers improved transmission efficiency compare to a 75W-140 grade. It ensures 0% shear loss : Unshearable oil film in extreme conditions. Suitable for any type of seal and yellow material used in gearboxes design.